Termite Control Products for Beginners

Not known Facts About Termite Control Procedure


Mud tubesUnlike ants, termites do not ramble around on the ground surface or out in the open. They'll either tunnel through the soil or into wood (or other material) or else travel inside pencil-size (or larger)"mud tubes" that they assemble from soil, wood contaminants and other materials. You'll find these tubes on foundation walls, floor joists or other parts of the house.

9 Easy Facts About Termite Control Process DescribedThe Facts About Termite Control Products Revealed
Break open the tubes to determine if termites are still active. An empty tube doesn't necessarily mean that termites are gone; they may have just abandoned this specific tunnel. Termites often rebuild damaged tubes, which is another indication of current action. 'Old' tubes are dry and crumble easily, leaving behind"etching" on the surface which could be visible for years (an indication that a house had termite activity at some time).

Tubes which are found on ceilings or on upper levels of a building may indicate that you have an aboveground ("aerial") infestation, i.e., the termite colony really resides in the building and the termites are traveling from the ground. Mud tubes constructed through an aboveground colony usually contain materials other than dirt, e.g., wood and sheet rock or anything the termites are feeding on.

Things about Termite Control ProcessThe Buzz on Termite Control Procedure

Termite Control Process Can Be Fun For Anyone


In such situations, a comprehensive inspection may necessitate removal of siding or interior wallboards, etc.. More importantly for you, these aboveground infestations cannot be controlled with the usual soil treatment (see below) and are typically deducted by a termite contract warranty. In these situations, finding and correcting the moisture problem is the first step to eliminating the termites. .

We tend to think of termites as feeding/injuring timber only. Termites really feed on almost anything that contains cellulose, the main component of wood, including wood paneling, paper products, cardboard boxes, art canvases, the paper covering of sheet rock, carpeting, etc.. While foraging and feeding, they may tunnel through non-cellulosic materials, such as plastic and foamboard.

Termite Control Process Fundamentals Explained


In fact, the amount of damage that termites cause depends on many factors. In regions with cold winter temperatures, termite activity (and feeding) often declines, but does not necessarily cease. When the termites are well-protected from colder temperatures (e.g., underneath a slab), then activity might continue year-round. From a practical standpoint, severe termite damage usually takes about 3-8 decades. .

There is no accurate method for determining the era of recently discovered harm. You need some reference point, i.e., some point in time when it was known that there was no harm to this specific wood. That is one reason why annual inspections (and keeping your records of these inspections) are important. .

NOTE: All these inspections are not a guarantee that you do not have termites or damage in areas which are not covered or not easily seen, such as inside walls. On the other hand, the inspections can reveal conditions that may imply that damage does exist and additional investigation is needed.

In case you have a termite protection contract, contact the pest control company quickly and arrange for them to take a look at the problem. If you do not have a termite contract, call 2-3 (or more) companies and have each one inspect your home and offer you the details of their findings and any recommendations for a plan of action to fix any termite problems they found.

The Main Principles Of Termite Control Process


Termites do not cause significant damage in a short period of time, so spending a few extra days or even a couple weeks will not make any actual difference in terms just how much damage occurs. .

Is there harm That Needs to Be repaired or examined by a contractor or engineer before control steps are performed

Simply spraying swarmers or the surface of accessible infested wood can kill the termites which you see now, but it does not block the infestation nor does it protect your house from potential attacks by termites. The most common sort of termite treatment involves a"trench and cure" where a liquid insecticide ("termiticide") is placed on the soil surrounding crucial areas of your house.

The Termite Control Procedure PDFs


The soil is trenched 6" deep and approximately 4-6" wide. For homes with crawlspaces, the soil along the interior foundation wall must be treated at least within 4 ft of identified signs of termite activity. In some circumstances, the soil around supports (for example, piers) underneath the house are also treated.

When applied correctly, this treatment forms a continuous chemical barrier adelaides best termite control company that should prevent termites from reaching the foundation and piers in your residence. .

Concrete slabs which attach to the house, as an instance, a garage floor, or the slab of an earth-filled porch.

Leave a Reply

Your email address will not be published. Required fields are marked *